Makita TD001GD201 40V Cordless Impact Driver (XGT Series) – vertexpowertools

FEATURES: High Power 220 N·m Genuine solution for high demand industrial users Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws Delivers up to 50% higher work speed than DTD171 Multiple operation modes for a

FEATURES:

• High Power 220 N·m
• Genuine solution for high demand industrial users
• Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws
• Delivers up to 50% higher work speed than DTD171
• Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)
• Improved bolt modes for more convenience in tightening machine screws
• Constant speed control maintains fastening torque by preventing the rotation speed reduction caused by decreased battery capacity
• New one-touch bit installation; In order to prevent the bit from unexpectedly falling off, more effective mechanism has been realized by increasing the spring load of the sleeve holding spring and by adding a coil spring not to increase resistance against insertion of the bit
• One-touch speed selector provides precise fastening control for a wide range of applications
• Enhanced anvil holder rigidity; Material change from Needle bearing to Ball bearing provides reduction of bit wobbling
• Variable speed control by trigger for precise fastening in a wide variety of applications
• Built-in LED light illuminates the work area
• Phosphorescent bumper glows in dark places
• Ergonomically designed handle with rubberized soft grip for increased comfort
• Reversing switch is conveniently located
• Electric brake for maximum productivity
• Durable, reversible belt clip convenient for temporary tool hanging
• eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Battery protection circuit protects against overloading, over-discharging and over-heating

SPECIFICATIONS:

Li-Ion

Ah

4.0

2.5

 

Capacity	Machine Screw: M4 – M8 (5/32″ – 5/16″)
	Standard Bolt: M5 – M16 (3/16″ – 5/8″)
	High Strength Bolt: M5 – M14 (3/16″ – 9/16″)
	Coarse thread (in length): 22 – 125 mm (7/8″ – 4-7/8″)
Hex Shank	6.35 mm (1/4″)
No Load Speed (RPM)	Max / Hard / Mid / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 3,700 / 3,200 / 2,100 / 1,100 / 1,800 / 2,500 / 3,700 / 3,700 / 2,400 / 3,700
Impacts Per Minute (IPM)	Max / Hard / Mid / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 4,400 / 3,600 / 2,600 / 1,100 / 4,400 / N/A / 4,400 / 4,400 / N/A / 2,600
Max Fastening Torque	220 N·m (1,950 in.lbs.)
Fastening Torque	Hard / Mid / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.)
Max Output	600 W
Vibration Level	Impact tightening of fasteners of the maximum capacity of the tool: 10.0 m/s²
Vibration K Factor	Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s²
Sound Pressure Level	96 dB(A)
Sound Power Level	107 dB(A)
Noise K Factor	3 dB(A)
Dimensions (L x W x H)	w/ BL4025: 120x86x245 mm (4-3/4″x3-3/8″x9-5/8″)
	w/ BL4040: 120x86x250 mm (4-3/4″x3-3/8″x9-7/8″)
Net weight	1.7 – 2.0 kg (3.7 – 4.4 lbs.)

FEATURES: High Power 220 N·m Genuine solution for high demand industrial users Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws Delivers up to 50% higher work speed than DTD171 Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes) Improved bolt modes for more convenience in tightening machine screws Constant speed control maintains fastening torque by preventing the rotation speed reduction caused by decreased battery capacity New one-touch bit installation; In order to prevent the bit from unexpectedly falling off, more effective mechanism has been realized by increasing the spring load of the sleeve holding spring and by adding a coil spring not to increase resistance against insertion of the bit One-touch speed selector provides precise fastening control for a wide range of applications Enhanced anvil holder rigidity; Material change from Needle bearing to Ball bearing provides reduction of bit wobbling Variable speed control by trigger for precise fastening in a wide variety of applications Built-in LED light illuminates the work area Phosphorescent bumper glows in dark places Ergonomically designed handle with rubberized soft grip for increased comfort Reversing switch is conveniently located Electric brake for maximum productivity Durable, reversible belt clip convenient for temporary tool hanging eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions Battery protection circuit protects against overloading, over-discharging and over-heating SPECIFICATIONS: Li-Ion Ah 4.0 2.5   Capacity Machine Screw: M4 – M8 (5/32″ – 5/16″) Standard Bolt: M5 – M16 (3/16″ – 5/8″) High Strength Bolt: M5 – M14 (3/16″ – 9/16″) Coarse thread (in length): 22 – 125 mm (7/8″ – 4-7/8″) Hex Shank 6.35 mm (1/4″) No Load Speed (RPM) Max / Hard / Mid / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 3,700 / 3,200 / 2,100 / 1,100 / 1,800 / 2,500 / 3,700 / 3,700 / 2,400 / 3,700 Impacts Per Minute (IPM) Max / Hard / Mid / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 4,400 / 3,600 / 2,600 / 1,100 / 4,400 / N/A / 4,400 / 4,400 / N/A / 2,600 Max Fastening Torque 220 N·m (1,950 in.lbs.) Fastening Torque Hard / Mid / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.) Max Output 600 W Vibration Level Impact tightening of fasteners of the maximum capacity of the tool: 10.0 m/s² Vibration K Factor Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s² Sound Pressure Level 96 dB(A) Sound Power Level 107 dB(A) Noise K Factor 3 dB(A) Dimensions (L x W x H) w/ BL4025: 120x86x245 mm (4-3/4″x3-3/8″x9-5/8″) w/ BL4040: 120x86x250 mm (4-3/4″x3-3/8″x9-7/8″) Net weight 1.7 – 2.0 kg (3.7 – 4.4 lbs.)

TD001GD201 - 40 V Max Slagschroevendraaier

POWER : Makita-built brushless motor delivers 1,950 in.lbs. of Max Torque VERSATILITY : Digitally controlled modes; two T-modes, one assist mode and

Makita Max XGT 40V Brushless Cordless 4-Speed 4-3/4-Inch Impact Driver with One-Touch Power Selector Button and Two Tightening Modes

Cordless Impact Driver, Li-Ion, 12.0V - 通販

Makita TD001GD201: Cordless Impact Driver, 1/4, 40V, 3700rpm, 220Nm

FEATURES:, High Power 220 N·m, Genuine solution for high demand industrial users, Having excellent ability to perform heavy-duty continuous

Makita TD001GZ 40V Cordless Brushless Impact Driver (XGT Series) [Bare Tool]

MAKITA XGT CHRISTMAS COMBO 3 CORDLESS 40Vmax DF001GD201 DRIVER DRILL 13MM (1/2) + TD003GZ IMPACT

40V max XGT® Brushless Cordless 4‑Speed Impact Driver Kit (2.5Ah)

Makita Tools – Page 10 – vertexpowertools

Model: TD001GD201, Makita TD001GD201 is a powerful Impact Driver from the brand new 40Vmax XGT Range. This new standalone cordless system from Makita

Makita TD001GD201: Cordless Impact Driver, 40V, Hex. Shank 1/4, 0-3700rpm, 220Nm, 1.7kg

Makita Cordless Tools – Page 4 – vertexpowertools

Makita TD001GD201 40v Max XGT Brushless Impact Driver (All Versions)